DMP XTL+ Panels
Silencing an Alarm
When the alarm siren is sounding, enter your user code or present your card to a keypad or reader during the Status List display.
IS THIS A FALSE ALARM? YES NO or CANCEL VERIFY displays.
- If a burglar alarm is valid, press NO or VERIFY to send a verification
message to the Central Station. The system will remain armed.
- If a valid alarm has not occurred, press YES or CANCEL to cancel the alarm and send an Abort or Cancel message to the Central Station and the security system will be disarmed.
Note: For Area Systems, this prompt is displayed only if the User Code has the authority to disarm the area.
What to do when a trouble tone is sounding
You can silence the trouble tone by pressing the yellow trouble banner at the top of the panel display. This only silences the keypad and does not correct the condition that originally caused the problem
To reset system hold RESET. Sensors on/off will display at top right of display.